Condensateurs haute tension
Quote within 6 hours · radial-lead ceramic typically 3–4 weeks · fast screw-terminal ranges about 1 month.
HVC manufactures high voltage capacitors from 1 kV to 150 kV: radial-lead ceramic discs, screw-terminal doorknob capacitors, metallized polypropylene film and safety-certified AC parts. Ceramic components use N4700 Class I or Y5T Class II dielectric and are screened to partial discharge ≤ 5 pC at rated voltage.
Choosing a high voltage capacitor starts with three questions: what voltage stands across it in service, how much capacitance the circuit needs, and how much capacitance drift the design can tolerate. Everything else — package, mounting, dielectric, termination — follows from those three. This page maps the families HVC makes onto those questions, then links to the detailed specification pages.
The three families at a glance
| Family | Tension | Capacitance | Diélectrique | Montage |
|---|---|---|---|---|
| Radial-lead ceramic disc | 1 kV – 50 kV catalogue, 70 kV to drawing | 10 pF – 33,000 pF | N4700, Y5T, Y5P, Y5U, Y5V, SL | Radial leads, 5–20 mm spacing |
| Poignée de porte à bornes à vis | 10kV – 150kV | 100 pF – 30,000 pF | N4700, Y5T, Y5V | M4 / M5 / 8-32 UNC stud |
| Film polypropylène métallisé | 700 à 3000 Vdc | 0.0068 – 5.6 µF | Self-healing PP film | Radial, PCB mount |
| Safety certified AC | 250 – 760 Vca | 100 pF – 1 µF | Y5P, Y5U, Y5V | X1/Y1, X2/Y2 radial |
High voltage resistors and rectifier diodes for the same circuits are on separate pages: thick film resistors et diodes redresseuses.
Class I or Class II dielectric
This is the decision that most often goes wrong. Class I (N4700) holds its capacitance across temperature and voltage; Class II (Y5T, Y5P, Y5U, Y5V) packs more capacitance into the same body but drifts.
| Diélectrique | Classe | Drift over −30 to +85 °C | Là où il appartient |
|---|---|---|---|
| N4700 | Classe I | Defined negative coefficient, stable | X-ray and CT tanks, laser PFN, snubbers, RF, HVDC valve positions |
| Y5P | classe II | ± 10% | General HV filtering, coupling |
| Y5T | classe II | +22% / −33% | Cost-sensitive HV filtering and multipliers |
| Y5U / Y5V | classe II | +22% / −56% to −82% | Non-critical decoupling where size dominates |
If the circuit is a snubber, a pulse-forming network, a resonator or a voltage divider, drift changes the circuit behaviour and Class I is the only safe choice. If it is bulk filtering where a ±30% shift does not matter, Class II gives you the capacitance in a smaller body. The Comparaison N4700 vs Y5T travaille à partir des chiffres.
Sélection sur candidature
| Application | Spécifications typiques | Commencez ici |
|---|---|---|
| Medical X-ray and CT high voltage tanks | 20–80 kV, N4700, PD ≤ 5 pC, oil immersed | Solutions d'imagerie médicale |
| Pulsed laser and PFN discharge | 10–50 kV, high dV/dt, low ESL | Pulsed power solutions |
| HVDC and VSC converter valves | 10–150 kV screw terminal, grading and snubber duty | HVDC valve capacitors |
| NDT and inspection X-ray | 30–100 kV, low ripple, stable capacitance | Precision inspection solutions |
| IGBT snubber and DC link | 700–3000 Vdc, self-healing film | Condensateurs à film |
| AC line filtering and safety | X1/Y1, X2/Y2 rated to IEC 60384-14 | Condensateurs de sécurité |
Every voltage class, specified
Each rating below has its own specification page with the full part-number table, capacitance range, dielectric options, stud or lead dimensions. Use it to pick the exact value rather than browsing the catalogue.
| Tension | Radial-lead ceramic disc | Poignée de porte à bornes à vis |
|---|---|---|
| 1kV – 8kV | 1 kV–8 kV disc specification | - |
| 10 kV | 10 kV disc specification | - |
| 15 kV | 15 kV disc specification | - |
| 20 kV | 20 kV disc specification | 20 kV doorknob specification |
| 30 kV | 30 kV disc specification | 30 kV doorknob specification |
| 40 kV | 40 kV disc specification | 40 kV doorknob specification |
| 50 kV | 50 kV disc specification | 50 kV doorknob specification |
| 70kV – 100kV | Disc range to 50 kV; higher ratings built to drawing | 70–100 kV doorknob specification |
| 150 kV | - | Screw-terminal, 800 pF, built to drawing — full doorknob range |
Lead time by product family
| Family | Horaire typique | What confirms the date |
|---|---|---|
| Radial-lead ceramic discs | Généralement 3 à 4 semaines | Voltage, capacitance, dielectric, lead spacing, quantity and destination |
| Screw-terminal doorknob capacitors | Fast catalogue ranges can be about 1 month | Voltage, capacitance, disc construction, stud, quantity and delivery location |
| Film and safety-certified AC capacitors | Confirmed by the selected series | Part number, certification requirement, quantity and destination |
These are normal planning ranges, not a promise of immediate stock. Custom voltage, capacitance, stud, insulation, coating, drawing or qualification requirements require a separate date confirmation after RFQ.
What the datasheet has to state
Four figures decide whether a high voltage capacitor survives. Ask for all four on any quotation, from any supplier:
- Partial discharge at rated voltage — not at 1.5x, not at a lower voltage. A void that discharges at operating voltage erodes the dielectric while the capacitance still reads in tolerance. HVC screens every unit to ≤ 5 pC at rated voltage and supplies the record.
- Dielectric strength test level — HVC tests at 150% to 200% of rated voltage, so the service stress sits well below the tested breakdown.
- La resistance d'isolement — 10,000 MΩ for the N4700 screw-terminal range; it sets the DC leakage against the parallel resistor chain in dividers.
- Capacitance at the stated test frequency — 1 kHz and 1 MHz give different numbers on the same part. Match the measurement to the circuit.
Replacing a discontinued high voltage capacitor
Most of the high voltage capacitors in service today were designed in when a catalogue part existed. When Murata, TDK or Vishay ends a series, the board does not change — the capacitor has to fit the same footprint and mounting. HVC builds to the original drawing and publishes a cross-reference table with the offer. Send the original part number, the drawing or the datasheet page; the capacitor cross-reference index covers the Murata, TDK, Vishay and AVX programs already mapped.
Foire aux questions
What is the highest voltage available?
150 kV DC in screw-terminal ceramic. Above that, series stacks are built to drawing; the mechanical envelope becomes the limiting factor rather than the ceramic.
How much should I derate a high voltage capacitor?
For continuous DC duty, 50% to 70% of rated voltage is the working range most designs use. For repetitive pulse duty the limit is dV/dt and self-heating, not the DC rating — ask for the pulse data on the specific part.
Ceramic or film for a high voltage application?
Ceramic wins above roughly 10 kV and wherever the package must be small or the part must survive high temperature. Film wins where self-healing matters, where microfarads are needed, or where the pulse energy is large at a few kilovolts.
Do you supply single units and small lots?
Yes. Prototype and laboratory quantities are quoted the same way as production orders, with the partial-discharge record per unit.
Quel est le délai de livraison?
Standard ceramic ranges ship in 4 to 6 weeks; rectifier stacks and catalogue screw-terminal parts in 2 weeks. Quotations are returned within 6 hours.
Send the working voltage, capacitance, dielectric class, package envelope and annual quantity. HVC replies with a matched part number, partial-discharge data and a 6-hour quotation.
Demande de devis technique →